news & press

The palm nailer is a simple structure, small size, stable striking, high operating efficiency, and convenient use air nailer. It can control the percussion force by adjusting the air supply pressure.

VALU-AIR CPN90 drives nails in a locations that are too restricted to swing a hammer, It is a great tool for fastening joist hangers, This new design palm nailer is in compact structure, light weight and durable aluminum alloy body. Ideally suited for tight corners, toe-nailing, joist hanger installations and etc.

1. Use clean, Dry and Regulated compressed air at 4-7 bar (60-100psi)

2. Never exceed maximum and minimum pressure. Too low or too high pressure would cause noise, fast-worn or misfiring.

3. When connecting air supply always keep hands and body from discharge area of tool.

4. A filter-regulator-lubrication is required and should be located as close to tool as possible. (see Fig.4)

5. Keep air filter clean. A dirty filter will reduce the air pressure to the tool causing a reduction in power and efficiency.

6. For better performance, install a quick connector in your tool and quick coupler on the hose if possible.

7. Be sure all connections in air supply system are sealed to prevent air loss.

※ Maintenance

Disconnect the tool from the air compressor before adjusting, clearing jams,servicing & maintenance, relocating and during non operation.

·Regular lubrication, if your tool without using the in-liner automatic oilier, place 2 or 6 drops of pneumatic tool oil into the air inlet before each work day or after 2 hours of continuous use depending on thecharacteristic of workpiece or type of fasteners.

·Air-operated tools must be inspected periodically, and worn or broken parts must be replaced to keep the tool operating safely and efficiently. Check and change all worn or damaged O-rings, seals, etc. Tight all the screws and caps in case personal injury.

·Make regular inspection for Spring and safety mechanism to assure safe system is complete and functional: no loose and missing parts, no building or sticking parts.

·Keep nose of tool clean and free of any dirt lint or abrasive particles.

·When temperatures are below freezing, tools should be kept warm by any convenient, safe method.

VALU-AIR CPN90 Air Palm Nailer

Products Description：

• The use of hemicycle bolt can protect users'hand from damaging.
• Adjustable depth control for quick countersinking adjustment.
• Adjustable screw bit can be exchanged into deferent style.
• Light weight palm nailer reduces fatigue
• Drive bulk nails from 5d to 70d
• Magnetic nall guide for faster and easier driving
• Attached with leather bag, oil pot and wrench stanciard nail guide and full set O-ring

Product Parameters：